If you’re a gun enthusiast, there’s a good chance you’ve accumulated a collection that you’re proud to display. But, have you ever thought about building your DIY gun cabinet? Not only does it provide a secure place to store your firearms, but it also allows you to showcase your collection in a personal way.
This guide will walk you through the steps of creating gun closets. So, let’s roll up our sleeves and start creating a home for your arsenal.
Gather the Tools You Need
Before you get started, there are a few tools that you’ll need to have on hand. Depending on the design and materials of your chosen plan, this list may vary. However, here are some basic tools to consider:
- Circular or table saw
- Drill with various drill bits
- Screwdriver set
- Clamps
- Sandpaper or sander
- Wood glue
- Screws and nails
- Tape measure
Consider Your Design and Materials
When it comes to gun cabinets and racks, the possibilities are endless. You can go for a classic wooden design or get creative with hidden storage options. A popular choice is building a cabinet that doubles as a bookshelf or dresser, providing a discreet yet stylish way to store your firearms.
As for materials, wood is the most common choice due to its durability and versatility. You can also use metal or even repurpose old furniture to create a unique gun cabinet.
The DIY Process
Now that you have your tools and materials ready, it’s time to start building. Follow these general steps for most gun cabinet and rack plans:
Cut All the Pieces
Start by cutting all the pieces according to the measurements in your chosen plan. Take your time and make sure your cuts are precise to ensure a sturdy final product.
Assemble the Frame
Begin assembling the frame of your cabinet or rack. Use wood glue and screws or nails to secure each piece together. Use clamps to hold the pieces in place while the glue sets.
Add Doors, Shelves, and Racks
Once your frame is complete, add any doors or shelves according to your plan. For gun racks, you can use a pre-made rifle rack or create your own by cutting notches in a board. Make sure to leave enough space between each notch for your guns to fit comfortably.
You should also make sure to create a bullet storage space for your ammunition. You should have space for your 35 whelen brass and the like. This is important for both organizational and safety reasons.
Sand and Finish
After the assembly is complete, sand down any rough edges and add a finish of your choice. This not only gives your gun cabinet or rack a professional look but also helps protect the wood from damage.
Put Up Your Collection
Congratulations, you’ve now built your very own gun storage. Now it’s time to put up your collection and display it proudly.
Just remember to always follow proper safety precautions when storing firearms. Keep them unloaded and out of reach from children with the ammunition stored separately.
Display Your DIY Gun Cabinet With Pride
A DIY gun cabinet provides a secure and organized space for your firearms. By following these steps, you can create a piece that displays your collection in style.
Remember, the most important aspect of this DIY project is that it caters to your needs and preferences as a gun owner. So don’t be afraid to improvise.
Did you find this article helpful? If so, check out the rest of our site for more.
