One of the hardest things to do when cleaning a gun is disassembling and reassembling the slide. While there are a few different methods to go about it, there are also crucial steps to take to get the decline back in working order. These tips will help you ensure that your Glock 19 Custom Slide is back in tip-top shape.
Disassemble the slide
Disassembling a Glock can be challenging if you are unfamiliar with the gun’s mechanics. It’s a good idea to watch a video before starting disassembly. You don’t want to make any mistakes, and you don’t want to damage the gun.
First, make sure the gun is unloaded. If the gun is loaded, the slide can’t be removed, and the barrel can’t be popped out. After you have made sure everything is safe, you can start.
Next, remove the magazine. The magazine is held in place by a spring. Taking the spring out of the magazine will allow the striker to come off the slide.
Now, you can pull the slide back about a quarter inch. It will not reset the trigger. However, it will help you get your hand into the proper position.
Next, you can begin to remove the slide from the frame. You should be able to do this with four fingers. Use your thumb to hold the grip.
Clean the slide
A Glock has four major components: the frame, the barrel, the magazine, and the slide. The best way to maintain the pistol is by following the manufacturer’s instructions. If you have questions about cleaning your Glock, consult the owner’s manual.
To start, you should remove the magazine. It prevents you from accidentally chambering the gun. It is also an excellent idea to dry-fire the weapon before cleaning it.
Next, you should brush the muzzle end of the gun. You should also check the extractor claw. If it is damaged, it is advisable to replace it.
After you have cleaned the ejector, you should clean the inside of the slide. To do so, you should use a toothbrush dampened with a solvent. Make sure you cover all the exposed body parts of the gun.
Once you are finished cleaning the slide, you can lubricate it with high-quality gun oil. You can also lubricate the hood and the interior of the barrel.
Lubricate the slide
You should oil your pistol periodically if you own a Glock 19 custom slide. This is a quick and easy way to keep your weapon functioning well and will help you avoid malfunctions due to poor maintenance.
Aside from keeping your firearm running smoothly, lubrication helps prevent rust and corrosion. Lubricant can be applied to several parts of the gun, including the barrel, slide, and trigger.
When cleaning the Glock, you should make sure to follow the manufacturer’s recommended procedures. For example, you shouldn’t use a gun brush to remove dirt. It would be best to use a toothbrush to scrub the slide down.
In addition, you should stay under oil your gun. Excess lubrication can cause the firearm to become inoperable. Instead, try to spread the lubricant using your finger.
One of the best ways to clean a Glock is to take it out of the box and give it a good scrub. After that, you should dry it off thoroughly.
Store the slide
Glock pistols are easy to clean and maintain. However, they can get quite dirty. Hence, it is essential to follow these ten steps to keep your weapon in perfect condition.
Before cleaning a Glock, you must first remove all ammunition. Doing so prevents you from accidentally chambering a round. In addition, it is also a good idea to check the trigger safety. You should not be able to feel resistance while trying to press it. If you think it, you can back off, realign, and try again.
The next step is to remove the slide. This is the most challenging part of disassembly. Once the barrel is terminated, you should then lower the slide lock.
After the slide is off, you should use a clean rag or Q-tip to wipe off any residual gun oil or lubricant. It is advisable to have a small bottle of lubricant handy.
Next, you will need to clean the ejector. This is located on the rear left of the receiver. Make sure it is free of rust or other damage.